Comtech-ef-data RCS20 Manuale Utente Pagina 169

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 168
RCS20 M:N Redundancy Switch Revision 15
Remote Operations MN-RCS20 and CD-RCS20
A–27
A.3.7 Opcode <2200h> Relay Command or Query to Modem
Command Data Field (n+1 bytes):
<1> Channel Number Channel number for the modem for which the message is to be
relayed (0 to 9 for the RCS20)
<n> RLLP Packet from
Modem
Complete, addressed RLLP message block with (variable number of
bytes) sync byte, source address, destination address, Opcode, byte
count, data field and checksum) (Contents of Response Packet Data
Field: Dependent upon message relayed to modem.
A.3.8 Opcode <2202h> Set RCS20 Configuration
Command Data Field:
<2> Nonvolatile Bytes Number of nonvolatile RCS20 configuration memory bytes, including
these 2 bytes (221 decimal for RCS20)
<1> Number of Channels Maximum number of prime and backup channels available to the
RCS20 switch. (10 decimal for RCS20 as of Release 1.0)
<1> Nonvolatile Bytes per
Channel
Number of nonvolatile memory bytes per channel. This number may
vary with the release number. (10 bytes for RCS20 as of release 1.0
and 13 bytes as of release 4.0)
**Remote M&C developers must make use of this value to find out how
many bytes per channel are being transmitted.
<1> *Channel 0
Configuration
Bit 0 = Modulator present
Bit 1 = Demodulator present
(0 = not present, 1 = present)
<2> *Channel 0 Mod
Backup Delay
0h - BB7h in tenths of a second; decimal point implied
<2> *Channel 0 Demod
Backup Delay
0h - BB7h in tenths of a second; decimal point implied
<1> *Channel 0 Mod
Backup Configuration
Bit 0 = Backup 1 assigned to this modulator
Bit 1 = Backup 2 assigned to this modulator
(0 = not assigned, 1 = assigned)
Vedere la pagina 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 201 202

Commenti su questo manuale

Nessun commento